Our Technologies

Asept-Air uses only technologies which are proven to be effective and produce no undesirable byproducts such as ozone or free radicals.  Working in conjunction with its in-house laboratory and in partnership with various university and governmental research and testing facilities, Asept-Air is confident in the performance and safety of its products.  Asept-Air does not use technologies such as ion generators, electrostatic precipitators or ozone emitters which can actually turn impure air into toxic air.

We are proud to offer a wide range of technologies proven to be effective and produce no undesirable by products such as ozone or free radicals.

Another Asept-Air innovation available on select units ingeniously routes filtered air through a series of specially designed chambers to reduce air speed and smooth out turbulence before returning the filtered air to the room.  This process dramatically reduces exhaust noise levels to a whisper.

An engineered design that channels and distributes air-flow evenly and thoroughly over the media bed to optimize the removal and neutralization of volatile organic compounds, toxic fumes and offensive odors.  More traditional cylindrical or square cartridges do not distribute the air flow evenly across their media beds, resulting in only a fraction of the entire media bed being used continuously, significantly reducing effectiveness and leaving a majority of the media being unused rendering it unnecessary.   The combination of Asept-Air’s V-Techmedia cartridge and Purity-Plus granular media mix provides the most effective and reliable gas-phase filtration stage of air purification. Period.

Like activated carbon, Ultraviolet (UV) light can be used to effectively destroy bacteria and viruses.

And, like activated carbon, UV lights differ widely in type, design and effectiveness.  Asept-Air uses only non-ozone producing UV bulbs with a measured wavelength of 254nm.  Stronger bulbs are available, but as strength increases, ozone emissions can occur.  The process works like this, as particles travelling in the air stream are exposed to the UV light, their reproductive abilities are destroyed rendering them harmless since they are no longer able to reproduce.

Asept-Air’s exclusive and proprietary Purity-Plusgranular medias are unlike any others available and have been specifically formulated for removing volatile organic compounds (VOC’s), toxic gases and offensive odors during the gas-phase filtration stage of air purification.   Asept-Air uses only top quality raw materials and a tightly monitored series of proprietary processes to produce these highly effective and very versatile granular medias.  Asept-Air even has developed one to reduce carbon monoxide levels!  Whatever the contaminant Purity-Plusis your best defence.

Asept-Air utilizes prefilters wherever possible to capture larger particles such as dust, pet hair, pollen and other airborne contaminants that can clog HEPA filters and wreak havoc on internal components such as motor bearings and fan blades.  Washable electrostatic or inexpensive versions are best, since you can easily remove and clean or replace them on a regular basis, prolonging the life of more expensive HEPA and media based filters.

Photocatalytic oxidation (PCO) is a process whereby UV light is focused onto special metal plates which have been impregnated with Titanium Dioxide (TiO2). The UV light excites the TiO2 and as air particles contact the metal plates they are burned up (oxidized) leaving behind only microscopic amounts of water and carbon dioxide. Titanium Dioxide is a white, naturally occurring compound that is extensively used as a coloring agent in numerous everyday products such as cosmetics, toothpaste, food products, paper, paints and sunscreen, for its UV blocking properties. Photocatalytic Oxidation is effective at eliminating odors and destroying residual bacteria and viruses.

HEPA stands for High Efficiency Particulate Air, and there are standards to which the acronym HEPA applies, namely for a filter to be called HEPA it must remove (trap) 99.97% of particles of 0.3 microns in size  or large as the air passes through it.  Many claim to use HEPA filters, but in reality they do not.  The reason why you want to have a TRUE HEPA filter is because most bacteria and viruses are larger than 0.3 microns in size and thus a true HEPA filter will remove them from the air stream and anything less than that defeats the purpose of trying to purify the air.


Activated carbon, sometimes erroneously called charcoal, has been used for decades to effectively filter air and water.  Through a process called adsorption, small particles become trapped in very tiny microscopic cracks (fissures) found in grains of activated carbon.  Incredibly if you were to measure the surface are of all the fissures in a just handful of activated charcoal, the total surface area would be approximately 250,000 Ft2; or the equivalent of 5 football fields!  Typically there are 2 types of carbon filters in the market, those made of actual carbon grains, and those made by passing a piece of material through a carbon dust bath.  Each has their own merits, but one thing is certain, untreated, raw activated carbon (coal, coconut shells, wood, bamboo etc) alone is ineffective at removing  short-chain hydrocarbons such as alcohols and ammonia (perfumes and cleaning products), acetone (nail polish remover), formaldehyde (adhesives, particle board, fiberboard, chipboard)and sulfur compounds found in common household odors.  Through a process known as adsorption/desorption, these short-chain hydrocarbon particles are temporarily trapped by the activated carbon grains, but the bond is weak and when another particle hits the activated carbon grain, some of the previously trapped particles become dislodged and are released back into the air stream, effectively passing right through the carbon bed.

Asept-Air uses only activated carbon from reliable sources and lab tests each batch separately for purity and adsorption capacity.  In addition, Asept-Air employs very stringent handling and storage methods, keeping its activated carbon in a controlled environment to preserve effectiveness.

Load More